Gripset E60 Water Based Epoxy Primer

Water based epoxy primer and protective coating against moisture penetration and rising damp.

Categories Gripset, Primers

Product Description :

Can be used directly over damp mineral-based surfaces and newly laid “green” concrete. Provides a compatible surface for applying membrane, adhesive and other decorative finishes directly over. Prevents rising damp and moisture ingress. A non-flammable and odourless primer that is compatible in bonding the surfaces for Gripset membranes and other finishes.

Uses

Moisture barrier to negative sides of underground wall structures to prevent moisture ingress (basements, lift pits, retaining walls etc)
Protective primer over concrete and mineral surfaces containing residual dampness, enabling the application of finished coatings without blistering or delamination
Protection against rising damp and efflorescence on wall and floor surfaces to enable direct fixing of vinyl, carpet, tiles, timber, levelling compounds, screeds etc over

Substrates

Concrete, masonry surfaces, renders, screeds.
Concrete blocks and aerated concrete.

Technical Data

Coverage
Vapour Block Primer: 1 litre/3m²
Moisture Barrier: 2 x coat of 1 litre/3m²per coat

Dry Times
Recoat: 2-4 hours
Finishes: 24 hours
Full Cure: 7 days

Colour
Wet – Part A & B: Light Grey
Dry: Semi-gloss. Matte when aged

Packaging
4litre Kit: Part A & Part B in 2litre plastic pails
10-litre Kit – Part A & Part B in 5litre plastic pails
20-litre Kit: Part B 10litre of product in a 20litre pail. Part A in 10litre plastic pail