Aqua Mix High-Gloss Sealer

High Gloss Sealer is a specially formulated water-based blend of acrylic polymers that provides both a stain resistant surface seal and a durable high-sheen finish, eliminating conventional two-step methods utilising a sealer and finish. High Gloss Sealer allows moisture vapor transmission and is unaffected by ultra-violet light.

For use on:

Unsealed, textured natural stone, textured porcelain tiles, clay pavers including Saltillo, terra-cotta and adobe, cement tile, quarry. Internal use only.

Limitations:

Not recommended for use on smooth glazed ceramic or porcelain tile, as surface must be rough-textured to ensure adequate bonding.
Do not allow product to come in contact with any non-recommended surface.
Not recommended for use in or around pools, showers or areas subject to standing water.
Not recommended for use on countertops.
Keep surface clean and dry to reduce possibility of slip-fall accidents.

Drying Time:

Ready for surface traffic 6 hours after final coat.
Keep area dry for at least 12 hours.
Achieves a full cure in 24 hours.

VOC Content:

Maximum VOCs: 51 grams per litre
Available in:

946ml, 3.8L.

TDS

SDS