Aqua Mix Pro-Solv Sealer

Pro-Solv® is an economical, no sheen, solvent based penetrating / impregnating sealer for all interior & exterior natural stone (including around salt water swimming pools), tile & grout surfaces. Pro-Solv® is formulated to provide excellent stain protection. Perfect for very dense stone and tile. An ideal product for sealing porcelain tiles. Last up to 10 years.

Suitable Tile Types:

As a natural look sealer for all natural stone surfaces (such as sandstone, slate, marble, limestone, granite, bluestone / basalt) unglazed tiles, porcelain tiles, clay pavers, concrete, brick, masonry, terracotta and grout. For interior and exterior use.

Limitations:

Do not allow sealer to come in contact with any non-recommended surface
May slightly lighten or darken some stone surfaces
Sealer will not prevent surface wear or etching from acids or caustic chemicals

Drying Time:

Allow 30 minutes drying time between applications when conditions are 20° Celsius & 70% RH. If temperatures are lower or humidity higher then these times may be longer. If unsure about the specific job site temperatures and conditions please contact one of our technical advisors.
Ready for surface traffic in minimum of 2 hours.
Keep dry for a minimum of 12 hours.
Achieves a full cure in minimum of 24 hours.

Available in:

3.8L, 19L

TDS

SDS